Poster Image

Phases of Installation - videos

Getting Started

From your first inquiry through choosing options and the design and installtion process, you get nothing less than our very best.  We can assist you in the planning and decision-making process, and when you are ready to install, our field technicians will guide you and your contractors with space layouts, CAD drawings, technical information, and installation details.

Hassle-Free Installation

SwimEx pools can be installed indoors, outdoors, above ground, in-ground, or partially in-ground.  What's more, a SwimEx is free-standing and moveable; additional support is not required.  Our one-piece seamless design means no assembly required, great for new construction and open installations.  For easy access into existing space, choose from our four-piece designs assembled on-site.  If access is not an issue, you can choose to have them assembled in the factory.

Most SwimEx pools require 200-240 sq. ft. (18.6 - 22.3 sq. m.) of space (1000 S requires 450 sq. ft. or 418 sq. m.), and a pit or flat-level concrete slab.  The standard pit area is 12' x 20' (3.66 m x 6.1 m) (18' x 25' [5.49 m x 7.62 m] for the 1000 S) including a drain or sump pump.  On average, the electrical service needed is 105 Amps, 208-240V single-phase (for installations outside North America contact SwimEx for electrical requirements).  Your pool also arrives pre-plumbed needing only simple PVC connections.


Copyright ©2015 SwimEx, Inc. | 390 Airport Road | Fall River, MA 02720 | (800) 877-7946 / (508) 646-1600 | All Rights Reserved | Website by Design Principles, Inc.