SwimEx Maintenance Tip:

When filling or refilling your SwimEx pool, we recommend you release the air from the filter with a few simple steps:

1. Once your SwimEx is full of water, turn on the water pump.
2. Open the pressure relief valve located at the top filter.
3. Once a steady stream of water comes out of the pressure relief valve, close it.
4. Note the pressure reading on the gauge, this is your starting pressure.

From this point forward, check your filter pressure on a monthly basis. A high pressure reading can be a sign of dirty filter cartridges or air in the filter. Please consult your filter’s owner’s manual for more detailed information.