Endless Pools vs. SwimEx Pools

Compare swimex To Endless Pools

SwimEx 400os $24,500
Inlcuded at this base price:

7’6” x 17’6” free standing & self supporting SwimEx pool 6’6” x 12’ x 42” deep swim area with flat bottom One-piece fiberglass construction (white finish) SwimEx Paddlewheel System (6’ wide current) Variable speed up to 30,000 gallons per minute SwimEx water quality system Two stainless steel front exercise bars Fiberglass entrance steps w/ handrails Floor swim arrow

Endless Pool $19,900
Inlcuded at this base price:

8’ x 15’ free standing Endless pool 7’ x 14’ x 39” deep swim area Vinyl liner interior (dark blue) Endless pools hydraulic propeller (21” wide current) Variable speed up to 5,000 gallons per minute Endless pools water quality system Front exercise bar Endless pool vacuum Endless pools floating thermal blanket

Options & Accessories
SwimEx Pools
Endless Pools
Coping border around pool
Included (fiberglass)
$1,300 synthetic coping, $1,100 aluminum coping or a $280 bull-nose option
Thermal Blanket
$150
Included
Water Purification System
$595 Ozonator
Included Copper/Silver
High Performance Motor
Included
$700
Entrance Steps
Included
$230
2 Handrails Near Steps
Included
Only available with one handrail for $140
3-5 year Replacement Motor*
Not necessary
$450 without installation
Vinyl Liner Replacement
No Liner, Fiberglass construction
$500 - 800 without installation
Crane for offloading one-piece pool
$500**
N/A
Assembly of steel panels, Installation of vinyl liner, Install of plumbing fixtures to pool sidewall
N/A (one-piece pool)
$2,500***
Price Adjustment
$25,745
$26,020
SAVINGS WITH A SWIMEX
$275
*as stated in Endless Pools literature, “the submersed hydraulic motor should be changed every three to five years”
**prices are approximate and may vary per location
***if provided with a flat level surface and electrical service
Technical Specifications
SwimEx Pools
Endless Pools
Water Current
The swim current is generated by a paddlewheel located at the rear of the pool and driven by an electric motor. The current moves up to 30,000 gallons per minute. The current is 6 ft wide and 18” to 30” deep depending on the model. The current is the entire width of the pool and is constantly circulated by a paddlewheel putting the least amount of stress on joints than alternative pools.
The Endless Pool swim current is generated by a 16” propeller inside a 21” x 18” steel box driven by a hydraulic motor. The current moves up to 5,000 gallons per minute. The current is 21” wide and 18” deep and located in the middle of the Endless Pool. Endless Pool recommends replacing the motor every 3-5 years.
Accessories
Available SwimEx accessories include retractable security cover, underwater lights, hydrotherapy jets, gas heater, Swimometer™ (timer and current readout), side and front handrails, ozonator, water vacuum, fiberglass steps.
Available Endless Pools accessories include retractable security cover, underwater lights, hydrotherapy jets, gas heater, swim mirror, swim gauge and handrails.
Aesthetics
SwimEx’s standard color is white with many different colors of gelcoat available. The customer may also choose from hundreds of colored waterline tile colors to coordinate decor.
Endless Pools’ vinyl liner comes in three liner choices with four patterns and does offer waterline color tiles. Vinyl liners are not guaranteed for life and will need replacement.
Construction
SwimEx pools are constructed from fiberglass with a balsa wood core and gel coat finish. The wood core creates built-in insulation. The pool is bullet proof and weighs 3,000 pounds.
Endless Pools are constructed from galvanized steel panels with vinyl liner and tension straps. Foam insulation can be added as an additional option. Entire Endless Pool system weighs approximately 2,240 pounds.
Electrical Requirements
Standard SwimEx model requires 220/240 volt single phase and 105-amp service.
Standard Endless Pool model requires 220 volts single phase. With an electric heater and water quality pump can be wired to require as much as 80 amps - if you ignore the circuit saver feature. When wired correctly (or with a gas or propane heater), the true amperage requirements are 50 amps.
Installation
One-piece seamless design (no assembly required) is available for new construction. SwimEx Pools made in 4 or 8 piece designs allow easy access into existing locations. SwimEx Pools can be installed in-ground, above ground and partially in-ground.
Endless Pools steel panels arrive in “kit” form and are assembled on-site and can be moved into any area of the home. All Endless Pools require assembly. Endless Pools can be installed in-ground, above ground and partially in-ground.
Site Requirements
An area of 12 ft. wide by 20 ft. long is required for the standard size SwimEx pool. Access is required on two sides. A flat level surface allowing 460 lbs. per sq. ft. is required.
An area of 12 ft. wide by 18 ft. long is recommended for the standard size Endless Pool. Access is required in the front of the pool. A flat level surface allowing 200 lbs. per sq. ft. is required.
Water Area
The standard SwimEx size is 6ft. wide and 12 ft. long. Some models increase length to 16 or 18 feet. The four depths available are 42 in., 48 in., 50 in., and 60 in. A deep well of 6 or 7 ft. is also available. SwimEx models are available with or without side benches.
The standard Endless Pool is 8 ft. wide, 15 ft. long and 39 in. deep. Length and depth can be adjusted as an additional option. A one-foot bench surrounds the perimeter wall of the Endless Pool.
Water Speed
SwimEx pools feature 99 different currents, with water flow up 30,000 gallons per minute.
Endless Pools feature water flow up to 5,000 gallons per minute.
Price
One-piece pre-assembled SwimEx model price starts at $24,500.
The standard model Endless Pool price starts at $19,900.
LEARN MORE ABOUT SWIMEX PRODUCTS OR HOW TO ORDER